Fiberglass Reinforcing Mesh use in the wall warmth-keeping surface decorative system

Fiberglass mesh

Fiberglass Mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex.It has fine alkaline-resistant, high strength, etc.

Roll Size:1mx50m;

Mesh Size:4x4mm, 5x5mm, 10x10mm...

Weight:145g/m2, 125g/m2, 165g/m2, 75g/m2...

Color: white, blue, green, orange, yellow, ect.

Fiberglass Mesh is based on the middle-strong alkaline or non-alkaline fiber-glass loom-woven fabric and finished after being coated with an organic material. It features a strong alkali-resistant and a high strength. Mainly used in the wall warmth-keeping surface decorative system, a reinforcement for the material stratum water-proof system and as the reinforcement for the natural stonematerials...etc. It is an ideal material for building engineerig. It is widely used in wall reinforcement , outside wall heat insulation, and roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic and other building materials.

Feature:

1) Width: 1000mm.

2) Roll length:50m, 100m, 300m as per the customer requirement

3) Mainly Mesh Size: From 4 x 4mm To 10 x 10mm.

4) Mainly density from:60g/m2 to 300g/m2

5) Color: white, blue, orange and so on. All kinds of color could available

6)Packing:Inner packing:each roll is packed in shrink-wrap film or plastic bag then put on the Carton. Out pack could use Pallet if need it

main use:

fiberglass mesh is widely used in wall reinforcement , outside wall heat insulation, and roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic and other building materials.

weight for per square meter

5mm x 5mm :75g/m2, 90g/m2, 125g/m2, 145g/m2, 160g/m2, etc.

4mm x 4mm :75g/m2, 90g/m2, 110g/m2, 125g/m2, 135g/m2, 145g/m2, 160g/m2, etc.

10mmx10mm :90g/m2, 110g/m2, 125g/m2, 135g/m2.145g/m2, 150g/m2, 160g/m2, 200g/m2 etc.